Gaps which had developed between rubber sheets covering the floor of a seawater storage tank at a gas plant are filled in to protect the exposed concrete coating the bottom of the tank
Tag: AB Original
Case Study: Environment Agency Repair Crack in Underwater Wall Between River & Trout Farm
The Environment Agency permanently seal a 700mm long crack in an underwater wall discovered when abnormal levels of water were monitored passing from a river into a trout farm
Case Study: Fence Spurs Suffering from Concrete Cancer Filler Repair Using Epoxy Putty
Spurs suffering from concrete cancer which began disintegrating during the replacement of a trellis fence are repaired and rebuilt using Sylmasta AB Original Epoxy Putty
Case Study: Repair of Leaking 350mm Effluent Pipe Running out to Sea Underneath Salt Marshes
An effluent pipe running under salt marshes and out to sea is sealed in a logistically challenging repair which had to be completed in an eight hour window whilst the tide was out
Case Study: Reinforcement of Heavily Corroded Steel Pipe to Avoid Future Leak Repair
A heavily corroded section of steel pipe is reinforced, helping a site to avoid a future breach which would have required a costly and disruptive leak repair or replacement of the line
Case Study: Oil Refinery Repair of a Leaking Underground GRP Seawater Return Pipe
A leaking underground 3000mm GRP seawater return line is partially excavated and sealed in an epoxy putty repair at an oil refinery, cutting downtime from several weeks to two days
Case Study: Protection of Wooden Entrance Gates at an Estate in Scotland Against Rotting
Upgrades to an estate entrance gate created the potential for wooden slats to rot at the base until a waterproof, bevelled edge was formed from epoxy putty to prevent water pooling
Case Study: Filler Repair of 50mm Crack Between Toilet Waste Pipe & Bathroom Floor
A hole cut too big into a bathroom floor during renovations left a 50mm crack around the base of a toilet waste pipe, which required permanent sealing with a waterproof filler material
Case Study: Using Epoxy Putty for Cracked & Damaged Brick Repair & Restoration
Bricks suffering from cracks, holes and missing chunks as a result of lime blow are seamlessly repaired using epoxy putty coloured with brick dust at a site in the south of England
Case Study: Desalination Plant Partially Buried 3000mm FRP Discharge Return Pipe Repair
A desalination plant in Saudi Arabia needed to seal gaps between connecting rings left during installation of a 3 metre diameter FRP pipe before the facility could go online